- Part number: PN 686732 (Std. drum) / PN 687548 (Std. drum – Clutch in left side)
- Rated line pull: 6,800 kg / 15,000 lb (EN 14492-1 rating & SAE J706 rating)
- Line speed (at 1st layer of rope) : 9 mpm at 60 l/min (30 fpm at 15.9 g/min)
- Operation pressure: 150 bar / 2,175 psi
- Max oil flow: 60 l/min (15.9 g/min)
- Hydraulic motor: 156 cm3/rev (9.5 in3/rev)
- Gear ratio: 2-stage planetary gear 19.4:1
- Winch construction: Aluminum die cast housings with steel drum
- Clutch (Freespooling): Rotating ring gear
- Brake: Spring applied drag brake together with over-center valve supplied
- Rotation of winch: Wire rope shall be under-wound orientation only
- Drum barrel diameter: 127 mm (5″)
- Drum flange diameter: 252 mm (9.9”)
- Distance between flanges: 255 mm (10″)
- Mounting bolt pattern:
303.5 x 114.3 mm (12” x 4.5”)
368.5 x 171.2 mm (14.5” x 6.7”) - Wire rope recommended:
14 mm x 27 m (9/16″ x 89′) 1,960 N/mm2 (EIPS) grade with a minimum breaking strength of 137 kN (30,742 lbf) required for SAE J706 and EN 14492-1 ratings - Winch weight: 72 kg / 158.7 lb
- Gross weight: 88 kg / 194 lb
- Box dimension, (L x D x H) : 735 x 430 x 335 mm (29″ x 16.9″ x 13.2″)Compliant with EN 14492-1 requirements for vehicle recovery winch:
* The working coefficient for the first rope layer on the drum shall be at least 2.
* The D/d ratio to the center of the rope shall be at least 10 for the drum.
* Drum freeboard shall be at least 1.5 x rope diameter - Powered by a PTO/power take off unit driven pump
- Fast and variable recovery speeds for high work rate
- Highly efficient and constant operating torque motor
- 2 stage planetary gear train for greater pulling force
- Turn clutch by ergonomic T-handle for rapid wire rope payout
- Drag brake and over center valve providing complete braking
- EN 14492-1 supported: 10:1 D/d ratio and 2:1 wire rope strength allow severe duty vehicles and commercial recovery
- Meets SAE J706, CE machinery directive 2006/42/EC and EN 14492-1:2006 Power Driven Winches
Be the first to review “WINCHES COMEUP WINCH – HV-15”
You must be logged in to post a review.
Reviews
There are no reviews yet.